The Eye Tribe

Re: Cannot stream data

2015-03-04T23:48:23+02:00

Geoff,

Check your inbox and let me know here.

Statistics: Posted by skataMartin — 04 Mar 2015, 23:48

Re: Cannot stream data

2015-02-25T06:50:02+02:00

I'm having similar problems with an Asus N53SV notebook running Windows 7 64 bit

After initial install, I received the following message (from log file)...
2015-02-24 11:19:28.466|593922982|I|Eye Tribe Tracker firmware revision is 293
2015-02-24 11:19:28.469|593922982|I|Validate USB3 host
2015-02-24 11:19:28.469|593922982|I|Validate camera device stream
2015-02-24 11:19:31.707|593922982|E|The Eye Tribe Tracker cannot stream data
2015-02-24 11:19:31.716|593922982|E|The Eye Tribe Tracker is not working
2015-02-24 11:19:31.716|593922982|E|The tracker device has been connected but is not working

After reading this forum I updated the USB 3 driver (to Fresco Logic xHCI (USB3) Controller FL1000 Series, ver 3.5.93.0)
The EyeTribe server then connected (momentarily) to the device before disconnecting...
2015-02-24 11:53:00.907|375388767|I|Eye Tribe Tracker firmware revision is 293
2015-02-24 11:53:00.910|375388767|I|Validate USB3 host
2015-02-24 11:53:00.910|375388767|I|Validate camera device stream
2015-02-24 11:53:02.845|375388767|I|The Eye Tribe Tracker stands ready
2015-02-24 11:53:02.845|375388767|I|The tracker device has been connected
2015-02-24 11:53:24.034|3785766208|I|New connection detected [176093691904]
2015-02-24 11:53:24.728|375388767|I|The device stream has started
2015-02-24 11:53:24.728|3785766208|I|Tracker started
2015-02-24 11:53:24.728|3785766208|I|Creating new connection [176093691904]
2015-02-24 11:53:26.693|375388767|W|The device stream has paused
2015-02-24 11:53:27.692|375388767|E|The device stream has stopped
2015-02-24 11:53:29.808|375388767|I|The device stream has stopped
2015-02-24 11:53:29.808|375388767|I|Resetting the device!
2015-02-24 11:53:29.810|375388767|I|Stopping Direct Show device
2015-02-24 11:53:29.955|375388767|W|The Eye Tribe Tracker has been disconnected, waiting for connection

Numerous connection attempts have been made subsequently, without success. There seems to now be an error initialising the device (starting Direct Show)...
2015-02-24 13:43:20.977|2214501122|I|Initializing tracker device
2015-02-24 13:43:20.977|2214501122|I|Starting Direct Show device
2015-02-24 13:43:20.986|2214501122|I|Building Direct Show render graph
2015-02-24 13:43:46.310|2214501122|E|Direct Show [-2147024809] (tetcode:2219)
2015-02-24 13:43:46.310|2214501122|I|Stopping Direct Show device
2015-02-24 13:43:46.410|2214501122|E|Could not initialize The Eye Tribe Tracker
2015-02-24 13:43:46.414|2214501122|E|The tracker device has been connected but is not working

Any thoughts? would be appreciated
Thanks
Geoff

Statistics: Posted by skatagen — 25 Feb 2015, 06:50

Re: Cannot stream data

2014-12-11T02:08:41+02:00

Great! Thanks for letting me know.

Statistics: Posted by skataMartin — 11 Dec 2014, 02:08

Re: Cannot stream data

2014-12-10T11:45:24+02:00

Hi Martin,

thanks a lot. Updating the usb driver for my ASUS mainboard indeed did the trick

Regards
Digo

Statistics: Posted by skatadchakrav — 10 Dec 2014, 11:45

Re: Cannot stream data

2014-12-03T12:40:27+02:00

Same error here. Tracker is recognized but does not stream data. Server error msg is the same as posted by Jeroen. EyeTribe UI reports:

No data is coming out of the device, direct show stream not running.

I'm using a LogiLink USB 3.0 Express Card Interface (PC0056) with Win7 Enterprise SP1 64-bit on a Dell Latitude E6420 laptop. Eye Tribe Tracker Server v0.9.41.

Has anyone else tried this Express Card adapter? Works fine with other devices.

Statistics: Posted by skatasven.fuchs@fkie.fraunhofer.de — 03 Dec 2014, 12:40

Re: Cannot stream data

2014-12-02T03:43:54+02:00

Hi Digo,

Not sure what to make of it, I've seen some issues on computers with old/weak USB 3.0 controllers (especially from NEC/Renesas) but then steaming becomes unreliable for all modes.

- Two days ago I had some issues on a Windows 7 with an ASUS motherboard, downloaded the latest drivers and it started working well.

- Do you have a shorted USB cable you could try with? I've noticed when the cable becomes too long +2M some controllers have issues (for example, when an external hub is used).

A question, does this happen all the time for the 60 fps mode? Instantaneously or after a while?

Statistics: Posted by skataMartin — 02 Dec 2014, 03:43

Re: Cannot stream data

2014-11-26T12:19:08+02:00

Hi,
I am having the same problem but only when setting the framerate to 60 (i.e. anything other than 30). I tried using the config file as described here and also the .bat version. Both procedures produce the message

Code:: [10:01:47.049] ERR: The Eye Tribe Tracker cannot stream data! [10:01:46.042] INF: Accessing Tracker device - Verify that the USB host is working properly, and that the device is not already in use.

Setting the framerate back to 30 solves the problem. But using a monitor running at 60 I want to keep it symmetrical.
I am using the server software version 0.9.41 on windows 7 enterprise sp1. The tracker is model et1000 batch 2014-04
Any ideas?
Thanks!
Regards
Digo

Statistics: Posted by skatadchakrav — 26 Nov 2014, 12:19

Re: Cannot stream data

2014-11-07T00:54:27+02:00

Hi Jeroen,

Couple of quick questions to get me situated.

- Behavior is identical regardless of running Windows 7 or Windows 8?
- What is the brand/model of your system(s)?
- What version of our software are you using?

Statistics: Posted by skataMartin — 07 Nov 2014, 00:54

Cannot stream data

2015-01-30T17:30:29+02:00

(my apologies for this very late response, I forgot to enable email notification)

The problem still occurs with the latest version of the server (Windows SDK v0.9.49). I have experienced this problem across multiple devices, including:
* A MS Surface Pro 3 (Intel Core i5-4300U)
* An ASUS K53SC laptop (windows 7)
* A desktop running Windows 8.1 with motherboard Asrock H61M/U3S3

Statistics: Posted by skatajeroen.thunnissen@gmail.com — 06 Nov 2014, 13:21